Eibach 5" x 9-1/2" Front Springs
Eibach produces the finest racecar springs in the industry through unmatched precision and repeatability. Manufactured from the finest Hi-Tension spring steel; Eibach springs are produced to exceedingly precise tolerances.
- Ultra-Lightweight for Reduced Unsprung Mass
- Maximum Deflection in Combination with Smallest Block Heights
- Exceptional Block Resistance and Durability
- Precision Tolerances - The Tightest in the Industry
- Precision Planparallel and Square End Configurations Under Unloaded and Loaded Conditions to ± Degree
- Lowest Side Loads with Load Center Ideally Located Relative to Spring Axis
- Highest Linearity and Guaranteed Rate Consistency Within 2% Of Advertised Rate
- Each Spring Individually Tested and Rated
- Eibach Springs Lifetime Warranty
Type:
Conventional Front
|
Length
9.5
|
ID
5.5
|
Rate
550
|
Block Height
3.540
|
Travel
5.97
|
Load at Block Height
3276
|
Weight
6.41
|
Write the First Review!